Beams with rails 50 x 30 mm fixed by intermittent welding
All fixing components, cleats and fasteners Standard finish: shot blast SA 2. 5 and shop primer 40m
Static calculations and erection drawings.

Options
Rails 60 x 40 mm
Laminated rails : from A45 to Al 00 (in accordance with DIN 536 T 1 and 2 (12. 74)
Continuous welding of crane rail to crane beam
End stop, excluding non-steel buffers
Final paint
Galvanised finish.

Crane characteristics
Maximum crane capacity :15 tons
Maximum crane span: 25 m

Classification
H2B3 (to DIN standards)
French (to CTICM standards)

Deflections
Option 1: horizontal 1/500, vertical 1/500
Option 2: horizontal 1/800, vertical 1/700
Note: For the allowed deflection, the choice of option is the responsibility of the customer and/or supplier of the crane dependent on the crane and the nature of its use.
One crane per crane beam, or in the case of several cranes, the equivalent obtained by adding spacers.
Crane type: I (single girder) and (double girder)
Hoisting tool : hook.

Standard crane rails
Beams : single or continuously spanning dependant on design study
Span of beam: from 6 to 9 m bay spacing, with a limit of 8 m for crane capacity above 12. 5 tons.

Buildings can be designed to accommodate cranes and higher crane capacities can be considered on a case by case basis.